Date: Tue, 5 Nov 2002 11:48:22 -0500
Reply-To: Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
Subject: Re: I find out more on this hose thing.
Content-Type: text/plain; charset=iso-8859-1
What is this? SS braided over rubber hose?
Fredrich Hesterberg <FredsVW@WEBTV.NET>@gerry.vanagon.com> on 11/05/2002
11:34:22 AM
Please respond to Fredrich Hesterberg <FredsVW@WEBTV.NET>
Sent by: Vanagon Mailing List <vanagon@gerry.vanagon.com>
To: vanagon@GERRY.VANAGON.COM
cc:
Subject: I find out more on this hose thing.
I asked for more on this hose and got this from Mr.Terry after I ordered
this system from him last night and this is what I got back.
E-mail message
Yo Freddie---
Don't worry about anything.
The guys that were unloading on you don't know what they are talking
about.
I forgot something in my post last evening offering the SS replacement
lines for the early Vanagons.
Prior to me swapping out the rusted out lines on my own vehicle, I did
inquire at a couple of places to find out if in fact there would be any
adverse affects on the cooling system, and / or the aluminum engine
components.
The hose dealer told me that the stainless high pressure hydraulic lines
that he was going to make them out of would have zero residual affect on
the coolant or the aluminum.
Well he just sells the stuff, so I went one step farther, and made a
call to Caterpillar, and got ahold of their engineering / tech
department and asked the same question.
I was told that only a cheap alloy stainless would cause a problem, but
this type of line is not used in high pressure applications, therefore
would not present any adverse affects on the cooling system or the
aluminum engine of our vehicles.
And when I explained the where and how much of it was going to be used
he blatantly stated that this wouldn't be a problem.
Stainless high pressure line will not leach into the coolant.
Rest assured if in fact this set up would create a problem I most
certainly wouldn't have installed it into my own vehicle.
And the best part of this was it was simple and a permanent fix.
You'll be happy with this--if not--I'll send you your money back---
How about that for a deal???
I'll guarantee this set up to fit and not screw anything up--period,
done, morto, finito,on the rusted out lines at the wheel well on your
84---------
I'll have them to you by Monday or Tuesday of next week.
Later,
_________
|[ ] [ ] [ ]\
| | | |
~~~ ~||-(())----(())-|
Terry--
"Zoom, Zoom, Zoom"
Fred
This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under
applicable law. If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this e-mail,
in whole or in part, is strictly prohibited. Please notify the sender
by return e-mail and delete this e-mail from your system. Unless
explicitly and conspicuously designated as "E-Contract Intended",
this e-mail does not constitute a contract offer, a contract amendment,
or an acceptance of a contract offer. This e-mail does not constitute
a consent to the use of sender's contact information for direct marketing
purposes or for transfers of data to third parties.
Francais Deutsch Italiano Espanol Portugues Japanese Chinese Korean
http://www.DuPont.com/corp/email_disclaimer.html