Date:         Mon, 4 Nov 2002 10:38:35 -0800
Reply-To:     Pat Callaghan <patcal@CYBCON.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pat Callaghan <patcal@CYBCON.COM>
Subject:      idle control question
Content-Type: text/plain; charset="iso-8859-1"

     I want to make sure I understand this.  If the bus is warmed up, the idle is should be about 850RPM.  Mine is really 1200-2100RPM.  When I pull the connector off of the idle valve, the idle drops to what it is supposed to be.  Does this mean my idle control unit is bad?  Thanks.

Pat Callaghan
87 Westy GL
Portland, OR.
www.patcal.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.