Thanks again for the heater control info. I tested all systems yesterday and they are working fine. I was also testing the appliances and would like to know if the 120v A/C connection provides any charging to the starting battery. What happened was after testing the 120 oulets for functionallity the battery meter went to yellow. The next morning it was green again. I also have a couple of questions about my next projects. I asked several of you about cleaning the air flow meter. I have done some further research and am ready to attempt this. I just want to know what to use to seal the air flow meter cover when I am ready to put it back on? Also going to be resealing the poptop rubber. Can anyone recommend a good cleaner to clean the old adhesive out and a good adhesive to use again? Any help would be greatly appreiated. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.