Date:         Mon, 11 Nov 2002 15:39:24 -0500
Reply-To:     Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
Subject:      Digijet Euro ECU Tuning
Content-Type: text/plain; charset=us-ascii

Does the AFM do anything at idle?  In other words, does the spring tension
affect the idle mixture at all or is it strictly set by the mixture screw?
I am trying to tune with the new HP Digijet ECU  in my otherwise stock 1.9l
Boston Bob engine.  I have tightened the spring tension 4 notches in an
attempt to regain some of the lost mpg.  I put a Voltmeter on the O2 sensor
and roughly set the mixture by the voltage.  The idle mixture seems to run
leaner with the O2 sensor disconnected.  I would have guessed the other way
around, hence my question about the AFM's role at idle speed.  Maybe it
moves a little at idle?
The new ECU really makes a big difference.  I would highly recommend it.
Seat of pants feels like 10 hp, at least as good as a stock 2.1l.

                                                            Jay



This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under
applicable law.  If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this e-mail,
in whole or in part, is strictly prohibited.  Please notify the sender
by return e-mail and delete this e-mail from your system.  Unless
explicitly and conspicuously designated as "E-Contract Intended",
this e-mail does not constitute a contract offer, a contract amendment,
or an acceptance of a contract offer.  This e-mail does not constitute
a consent to the use of sender's contact information for direct marketing
purposes or for transfers of data to third parties.

 Francais Deutsch Italiano  Espanol  Portugues  Japanese  Chinese  Korean

            http://www.DuPont.com/corp/email_disclaimer.html