Date:         Mon, 18 Nov 2002 13:04:01 -0500
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Tweak yer heater output!
In-Reply-To:  <5.1.0.14.2.20021118122337.0264cdb0@pop1.attglobal.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 12:27 PM 11/18/2002, David Beierl wrote:
>The light (when working properly) blinks for a few seconds any time the
>gauge receives a signal that would cause it to read full scale (even if the
>signal is only very brief).  This happens either when the temp is too high

I should have added, if the input signal remains high, the light continues
blinking until a few seconds after it is removed.

david


--
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.