Date:         Mon, 18 Nov 2002 13:50:03 -0800
Reply-To:     Dana Morphew <kadm@PUGETSOUND.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dana Morphew <kadm@PUGETSOUND.NET>
Subject:      Re: Cutting out on acceleration
Content-Type: text/plain; charset=us-ascii; format=flowed

Robert Keezer wrote:


> Symptoms show on acceleration at low rpm. And after about 2800 rpm disappear. You can't start out going uphill. On the level, you have to be very slow with the gas pedal. Sometimes it stalls-just like it did with the AFM problem 5 years ago.

> Robert


If you don't have any vacuum leaks and the grounds are fine, it might be in the
cap/rotor/Hall sender area.

Dana

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.