Date:         Tue, 26 Nov 2002 19:48:10 EST
Reply-To:     THX0001@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Goff <THX0001@AOL.COM>
Subject:      Re: ISO: Fuel filler hose, syncro
Comments: To: poll7356@UIDAHO.EDU
Content-Type: text/plain; charset="US-ASCII"

In a message dated 11/25/02 1:28:33 PM, poll7356@UIDAHO.EDU writes:

<< The filler hose (1 5/8" ID) . . .   . . .  Ideas? >>

Matthew,

I can get 1 5/8", SAE J1527, Type B2, fuel hose for you.  It is Buna-N rubber
with a neoprene cover.  Also, it has a Nylon reinforcement with a steel wire
helix.  Are you sure that 1 5/8" hose will work since that size converts to
an odd metric dimension.  How much do you need?

George

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.