Date:         Sat, 30 Nov 2002 00:11:06 EST
Reply-To:     JordanVw@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JordanVw@AOL.COM
Subject:      Re: how to HOT-WIRE a Vanagon?
Comments: To: lalofs@ENTERACT.COM
Content-Type: text/plain; charset="US-ASCII"

In a message dated 11/29/02 6:16:50 PM Eastern Standard Time,
lalofs@ENTERACT.COM writes:


> How do you remove the switch when you don't have the key?
>    The procedures I have read seem to assume that you have the key.
> Recently at a junkyard I wanted to pull the electrical part of the
> switch, but the method was not very obvious.
>
>

dtill a small hole in the potmetal ignition housing and the ignition tumbler
can be popped out w/ a small screwdriver.    ken wilford tought me that :<)
chris

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.