Hello Mike: Don't over re-act. It just may be possible that the screw that holds the wiper arm down and in place has come loose and the pressure put on the arm has caused it to slip a notch or two. Pop off the plastic cap at the base of the wiper arm which will expose the nut that holds the arm in place. Take the nut oft, fold the arm toward yourself and remove it from it's base, it will probably take a little jiggling. Reinstall it to align it with the other arm and put it all back in place.. :-) regards. clarence. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.