Date:         Tue, 3 Dec 2002 23:41:31 -0600
Reply-To:     Stan Wilder <wilden1@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Bars Leak
Comments: To: bajaleo@COX.NET
Content-Type: text/plain; charset=us-ascii

It is a product that has been around for well over fifty years.
Bars leak will seal pinhole leaks in a radiator or heater core.
It has some properties to it that lubricate the water pump.
It was not formulated to seal compression leaks.
It might seal some leaks at water pump gaskets or intake manifold gaskets
in the case of Detroit Iron.
K&W makes similar products that I understand are good but still nothing
will stop compression leaks.

Stan Wilder


On Tue, 3 Dec 2002 21:14:07 -0800 Baja Leo <bajaleo@COX.NET> writes:
> I put in a bottle of Bars Leak when I was traveling up north to see
> if it would help with my o-ring problem. Didn't seem to make any
> difference in my case.
>
> Has anyone ever heard of Bars Leak,
>
> if so .. do u think that will seal up the gases that
> are gettin into the cooling system ?
>
>
>
> Leo Lipert
>
> San Juan Capistrano, CA
>
> '84 Wolfsburg Westy with Leaky Heads
>
> '00 Golf GLS
>
>

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com