Matt, Don't fret it too much - Troutman has made enough of these to know the proper ones. :) The only downside of the custom lines are that they don't have all the kooky bends that the stock ones use - the Troutman versions all use the straight version of the banjo fittings. Take care, TomC tcarrington@relitech.com http://volksweb.relitech.com http://checkerweb.relitech.com 85 VW Vanagon Crew Cab 82 VW Westy Diesel=>Gas Conversion 81 Checker A-11 (Taxi) 65 VW Notchback
-----Original Message----- From: Matt Ratto [mailto:mratto@UCSD.EDU] Sent: Monday, December 16, 2002 2:39 PM To: vanagon@GERRY.VANAGON.COM Subject: sizes of CIS injection system banjo and injector fittings
I'm getting nervous about the custom lines I ordered. Does anyone know the correct size of the banjo, cold-start, and injector fittings for a CIS K-jectronic system? thanks, Matt ------------------------------------- Matt Ratto Ph.D. Candidate University of California, San Diego mratto@ucsd.edu http://communication.ucsd.edu/mratto -------------------------------------- |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.