Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2002, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Sun, 15 Dec 2002 23:23:32 -0600
Reply-To:   Stan Wilder <wilden1@JUNO.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Stan Wilder <wilden1@JUNO.COM>
Subject:   Re: Update: More idle issues for idle hands and minds
Comments:   To: marcperdue@ADELPHIA.NET
Content-Type:   text/plain; charset=us-ascii

I replaced my hose from the oil breather to the intake boot with a 3/4" electrical conduit. It has a short piece of hose as a connector on each end with clamps. It has lasted eight years with just 4" of hose replaced every couple of years. The only oil that passes is minute but it can have considerable vacuum on it that can collapse on old soft hose. It creates a vacuum leak of it cracks or leaks. If you're new to your van I'd replace very FI hose with known quality FI hose and every other hose in the engine bay. The Fuel Injection hose is the most important to keep an eye on. Engine fires kill many VWs of all types. --------------------------------- Here is what I found out. 1) The Pep Boys hose allows me to tighten the OEM VW hose clamps completely down to full stop travel. 2) The Goodyear hose is of a harder *durometer* rubber and the clamps can still be tightened another four or five turns before they reach full stop. 3) Both are the same size hose and both have the same spec number on them. 4) Subtle difference in the hardness of the material they are manufactured from. I'm glad I spent the money and got the Goodyear hose ............... I'll just feel better. I know that all of Pep Boys store brand engine cleaners, alternate to LPS, alternate to WD40, alternate to Berryman B12 carb cleaner are pretty crummy products. ------------------------------------- I found one more little thing different in the FI hose. With the Pep Boys stuff I was cutting it with my Proto diagonal cutters. I had to use a razor blade to cut the Goodyear material. When you pick up the bubble pack and it says Made In China .............. just draw your own conclusions about quality. Stan > > engine compartment of this vehicle, thanks to my crappy dealer > service. > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.