Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2002, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 15 Dec 2002 12:08:38 -0500
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: front heater core flow restriction
Comments: To: Joachim Preiss <spielmobil@EARTHLINK.NET>
In-Reply-To:  <KDEFIMDKMLDACJCKCOGIGEFOCKAA.spielmobil@earthlink.net>
Content-type: text/plain; charset=US-ASCII

You are missing a lot. All air going through the heater is "Outside" air. That plate does two things, one it provides restriction to as too much outside air will never be heated. It also ensures the air contacts the entire core to get all of the heat off the core. It makes most of the air travel up-down, for maximum contact time. As cheap as VW is, if it wasn't needed, it probable wouldn't be there. As for heater performance, max heating is not obtained with the fan on high speed. Speed 2 will probably warm the van the fastest. Note the drawings no the right of the heater levers, max. defrost fan speed 2.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of Joachim Preiss Sent: Sunday, December 15, 2002 10:05 AM To: vanagon@GERRY.VANAGON.COM Subject: front heater core flow restriction

Volks, worked my way to the front heater fan in my '85 Westfalia 1.9 WBX checking out why it wasn't working. Found the fan completely rusty and dead. Hardly turns by hand. Anyways, as I was taking the heater core out of the flap housing, I found a square piece of sheet metal with 3 dozen holes in it covering 2/3 of the height of the core. Obviously an airflow restrictor. I think it was on the output side of the core, because there was dust and sand and dead bugs trapped underneath. My fan's been dead a long time, and I don't remember really what the output was, but is it ever enuff? And when it's cold why would you want to restrict the output of your front heater?! So I've kinda decided to leave that restrictor out when I put it back together with a new fan, but I wanted to ask the list for input maybe I am missing something.

Thanks as always. Frohe Weihnachten! Joachim

'85 Westfalia 1.9 WBX 'Spielmobil' [mailto:spielmobil@earthlink.net}


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.