I have to replace the seals in my heater box under the dash. I have some instructions I got off of the list. I have 2 questions I want to be sure about. 1: I believe my lower #4 lever that is supposed to control air to the back is hooked up wrong. When I move it, the flaps under the heater box move. These are the one you can see & feel if you remove the heater trim panel under the radio. Is this correct? 2: What type of foam should I use for the flaps? I understand the flaps are about 1 1/4" wide. Do I use the foam weather-strip with sticky on one side or what? I only want to do this once so any help would be appreciated. Pat Callaghan 87 Westy GL Portland, OR. www.cybcon.com/~patcal |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.