Date:         Sat, 28 Dec 2002 22:21:49 -0600
Reply-To:     Max Wellhouse <maxjoyce@IPA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <maxjoyce@IPA.NET>
Subject:      Re: STEBRO Muffler/Cat
Comments: To: Jason Denton <jasondenton@ATTBI.COM>
In-Reply-To:  <000f01c2aeeb$da8852f0$96878018@Francis>
Content-Type: text/plain; charset="us-ascii"; format=flowed

I've had one for over a year   The good is that it isn't rusting and isn't
any noisier than a stocker.  Bad news is it's a real tight fit under my
body panels and upon starting either the motor mounts(also only a year old)
wobble and the muffler clanks against the body.  Not sure the bolt hole
spacing/brackets on the Stebro  were all that well thought out as their not
nearly as stout as OEM.  The muffle is rather expensive, but on a scale of
1-10, I'd give it about a 6.

Max

At 10:39 PM 12/28/2002 -0500, Jason Denton wrote:
>I am wondering if anyone can give advice on the STEBRO muffler?   Anyone
>have any short/long term updates on these mufflers?   Is is louder or any
>performance improvements?
>
>Thanks, Jason
>90 Westy
>