Hey Y'all, I have been though the archives- with no luck. I am trying to repair my ARA cruise on my 85 Westy. It used to work fine, but after some maintenance it no longer engages. I have schematics and spares, and have done the block troubleshooting. There is not much detail where it attaches at the engine. The switch works- power and brake - the servo tests but no engage light. My question is; where exactly do the 2 pickup wires (coil? hall sensor? ground?)go- There is a black wire and a brown (#7,8). If you have an ARA setup with manual trans- working or not, please take a look at where your wires hook up in the engine compartment and let me know. TIA. Duncan Cameron Nashville,TN 85 Westy, 87 Syncro
_________________________________________________________________ The new MSN 8: smart spam protection and 3 months FREE*. http://join.msn.com/?page=features/junkmail&xAPID=42&PS=47575&PI=7324&DI=7474&SU= http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_smartspamprotection_3mf |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.