Date:         Mon, 30 Dec 2002 15:33:04 -0800
Reply-To:     Matt Ratto <mratto@UCSD.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Matt Ratto <mratto@UCSD.EDU>
Subject:      still can't pull CIS injectors!
Content-Type: text/plain; charset="iso-8859-1"

Happy holidays to all,

I'm sending another cry for help. I've almost finished my conversion (thanks
to many folks on this list) but still can't quite finish up due to a faulty
#3 injector. I managed to pull #1 and #2, but #3 and #4 just won't budge.
I've bent my VW special tool, a piece of steel I cut just for the job, and a
whole bunch of screwdrivers. Today I took off the valve cover in order to
get some more room on it, but although I can get a lot of leverage, still no
go. It's been doused more times than I can remember with WD-40 but that
hasn't helped either. Does anyone have any advice? Pull the lower insert?
Heat it with a blow torch (yes, that's a joke...)

Any advice would be appreciated... so close, so very close...

Matt
-------------------------------------
Matt Ratto
Ph.D. Candidate
University of California, San Diego
mratto@ucsd.edu
http://communication.ucsd.edu/mratto
--------------------------------------