Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2002, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 29 Dec 2002 06:14:02 EST
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: STEBRO Muffler/Cat
Content-Type: text/plain; charset="ISO-8859-1"

In a message dated 12/29/2002 12:05:01 AM Eastern Standard Time, LISTSERV@GERRY.VANAGON.COM writes:

> Bad news is it's a real tight fit under my body panels and upon starting > either the motor mounts(also only a year old) wobble and the muffler clanks > against the body. Not sure the bolt hole spacing/brackets on the Stebro > were all that well thought out as their not nearly as stout as OEM.

I personally have installed many of these mufflers for clients at my shop here in Almonte and when they are installed properly they will not touch any of the bodywork. There are extra large holes in the mounting brackets and a doughnut gasket & free floating flange fit to the CAT to allow for pro per positioning of the muffler so that it will not touch anything. The brackets were designed to act as suspension members for the muffler. There has been some failure of the brackets but it has been attributed to abnormal vibration caused by poor engine tuning or loose/worn engine mounts. In all these instances, even though we feel it is not the fault of the STEBRO/Van agon muffler, we have sent out new brackets under our warranty policy. The vast majority of these mufflers have had no problems. We are currently redesigning the brackets so that they will not be welded to the muffler and therefore much easier to replace if they fail.

Happy Holidays  

Frank Condelli Almonte, Ontario, Canada <A HREF="http://members.aol.com/BusFusion/bfhome.htm">BusFusion</A> a VW Camper camping event, Almonte, ON, June 12 ~ 15, 2003 '87 Westy & Lionel Trains Member: <A HREF="http://www.vanagon.com/">Vanagon List</A>, <A HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A HREF="http://www.westfalia.qc.ca/">IWCCC</A> & Capital City VW Club Vanagon/Vanagon Westfalia Service in the Ottawa Valley <A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel Mufflers</A>   <A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates</A> or http://frankcondelli.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.