I have the exact problem I lowered my 85 by 1.5 inches and it fits my garage too! Some say that you should do this by buying knew "lower" springs for about $400 plus time to install You can also do it by "compressing" the springs to "pull it down" AKA the low rider industry. In the end you get the same amount of suspension travel - although the "lower" spring kits are suppose to be stiffer - however my "pulled down" van, ride just fine. I used heavy duty hose clamps to pull mine down Todd last suggested this link: (it looks more solid to me) From Todd Last: Why not use regular coil spring adjusters?? Not a sublime way to attack the problem, but as they say, different strokes for different folks. See: http://www.jcwhitney.com/catsubpic.jhtml?CATID=3339 Todd '88 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.