Tread design has several functions. One is to aid in getting water from underneath the tire in wet conditions. Another is to reduce road noise, by carefully making the noise to cancel itself (negative reinforcement). Another function is to provide sharp edges to improve grip in snowy conditions. Tire manufacturers go through a balancing act, one against the others to get tires that have a good compromise in features. Tire composition also has a say in dry grip and wear life (another balancing act.) On Sunday, January 5, 2003, at 07:30 PM, 80 Westy Pokey wrote: > In fact a well worn tire will give you better braking and > handling than the same tire brand new. This only applies > however in dry weather. If it is wet, you need those treads > to shed water, handling on slicks in the wet is close to non > existant. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.