I used a Best Kits (www.bestkits.com) harness (P/N BHA1784) to install the new headend unit in my '87 camper. You can crimp or solder this harness to the one on your new radio and your new radio will plug into your existing radio connectors. The harness should cost under $15.00. Good luck, Tim
--- Marla Stelk <mjstelk@HOTMAIL.COM> wrote: > Is there some kind of > adaptor I need to attach the single wires I have for battery, ignition, and > ground to the pair that go into the Heidleberg? Do I need to solder all > connections to old wires or can I just use the plastic connector caps and > electrical tape?
===== TJ Hannink Goldibox - 1987 Vanagon Camper, Wolfsburg Edition Winter Park, Florida http://home.earthlink.net/~tjhannink/ http://groups.yahoo.com/group/wolfsburg_campers http://photos.yahoo.com/tjhannink [Vanagon] Album __________________________________________________ Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! http://sbc.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.