Date:         Fri, 10 Jan 2003 14:14:02 -0800
Reply-To:     vgonman@EARTHLINK.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Sean B." <vgonman@EARTHLINK.NET>
Subject:      Re: Differences in SA Big Brake Kit
Comments: To: 80 Westy Pokey <pokey@VANAGON.ORG>
In-Reply-To:  <200301102118.PTL39521@vmms5.verisignmail.com>
Content-Type: text/plain; charset="US-ASCII"

My understanding is that there is a spacing washer that is used when
installing the SA big brakes on a syncro. I'd say to get one of the other
folks who was in on the group buy to give you the dimensions of those
washers. I'd do it, except I've only got a 2wd. I was the LA area parts
distributor for the group buy. That's how I know about the washer. I just
didn't measure one while I had them in my garage.

Sean B.
'90 V'gon, "Happy Bus", pseudo Wolfy
'86 VW Scirocco 16v (New addition! Wahoo!)
'79 Yamaha 750 Special (still need to get it running)
Torrance, CA
Join the TiiCo registry at
HTTP://www.vgonman.com

Vanagon Mailing List <vanagon@gerry.vanagon.com> wrote on 01/10/2003
01:19:38 PM:

> My new syncro's front brakes are shot and I would like to
> replace them with my SA Big Brake Kit... but the kit I bought
> was the 2WD version.
>
> My understanding is the 2WD kit is just the syncro kit + 2
> replacement hubs... is this correct? Are the rotors both
> center machined to 67.2mm or just the syncro kit?
>
> Thanks,
> Chris

> ForwardSourceID:NT00078E52