Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2003, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 8 Jan 2003 19:13:30 -0600
Reply-To:     Stan Wilder <wilden1@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Great Engine test stand event, part 2
Comments: To: flub@ADELPHIA.NET
Content-Type: text/plain; charset=iso-8859-1

For Air Cooled engines. #1) Notch the rods, fit the pistons looser http://www.dolphinsci.com/techbull.html #2) Install a Windage Tray http://www.williamwareagency.com/forsale/stanvan/0063.htm #3) Install an oil cooler http://www.williamwareagency.com/forsale/stanvan/0059.htm #4) Properly monitor your engine functions with a CHT, Oil Pressure, Oil Temp gauge. Jake Raby has some special ceramic cylinders that he installs on his engines that makes them run very cool.

Stan Wilder

On Wed, 8 Jan 2003 18:46:49 -0500 Bradley Flubacher <flub@ADELPHIA.NET> writes: > What will you do with the cooling system? I've given this some > thought > myself. > > Brad > > > Frank Grunthaner wrote: > > >Stan, > > > >Excellent idea! Reading about your test stand adventures has made > me recall > >the many run and test hours I used to put on the older VW > air-cooled motors. > >The accessibility is excellent and the ability to monitor and > adjust things > >couldn't be better. I fondly remember the hours spent trying to > tune the old > >Holley BugSpray two barrel and the many hours on the stand tuning > my center > >IECO four barrel on the modified Corvair six that I then mounted in > the 72 > >Sundial hightop. > > > >I have several spare diesel trans bell housings and will have a > rotary > >adapter plate put together by the weekend for the Audi Turbo > engine. I was > >also considering making up a unistrut cage to mount the engine from > the '82 > >diesel frame supports in order to instrument some of the engine > mount and > >exhaust questions. > > > >Good input, not as tasty as a rack of Nürmberger Bratwursts with a > tankard of > >Aügustinerbrau, but stimulating nonetheless! > > > >Thanks, > > > >Frank Grunthaner > > > > > > > >

________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.