> I can hear what seems to > be a slight vacuum leak, but I can't figure out where it's from - it could > be the line running to the brake booster or maybe the valve cover gasket > (which is leaking a little oil.) However in both cases it would have to be > really small and I can't get a change by pushing or prodding at either the > hose or the cover. Matt, Maybe on newer engines such as this the following practice is taboo for some reason, but on every car I've ever owned the standard practice for tracking down a vac leak is to spray carb cleaner about the engine in places that are suspect. When the engine RPM increases, you know the carb cleaner has been ingested, and you can ascertain that wherever you last sprayed is a vac leak. I assume there must be some reason you're not using this method, though. If you are someone capable of an engine swap, I feel it unlikely a shade-tree hack like myself could teach you something. Good luck. Reid |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.