I have an idle stabilizer that I need help in diagnosing a possible failed component. The PN is 251 907 393 B Upon opening it up, there seems to be one component on the circuit board that is connected to the base of the unit that looks like it is burned out. It is a gray resistor-looking component it looks like it says 56R 10% Is this simply a 56-ohm resistor? Note: I took the idle stabilizer out of the Van and noticed no difference in operation, except that the idle was about 200 RPM lower than when it was connected. No difference in turning on the A/C or turning the power steering full-lock. thanks Todd '88 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.