Date:         Thu, 16 Jan 2003 16:34:35 -0600
Reply-To:     Chris Mills <scmills@TNTECH.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris Mills <scmills@TNTECH.EDU>
Subject:      Re: No cold start and the shaft from the shop (long)
Comments: To: Jimgreg@AOL.COM
In-Reply-To:  <47.2908e867.2b588528@aol.com>
Content-type: text/plain; format=flowed; charset=us-ascii

Rescue your bus and then e-mail us back. He's trying to take your money.

It is probably the cold start valve or the cold start temp switch.

Bet you couldn't even get an ECU for less than $300...

These parts will set you back at I think about $125 and you can do the work
yourself.

Chris Mills in TN

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.