VANAGON archives -- January 2003, week 3 (#515)

Date:         Mon, 20 Jan 2003 10:56:29 -0800
Reply-To:     Alistair Bell <albell@UVIC.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@UVIC.CA>
Subject:      Re: Taking out the dash for BEHR unit / Radio relocation
In-Reply-To:  <OF6724F43E.F335CF69-ON85256CB4.006654F6@hewitt.com>
Content-type: text/plain; charset="US-ASCII"

As well as the other good suggestions (heater blower, foam seals in heater
unit, checking heater for leaks), lubricate/check the bushings on the pedal
assembly. Oh and why not put some sound deadening pads on the sheet metal
too?

And another thing :), its slightly easier to check the electrical grounding
points too!

Alistair

--
'82 Westy -> diesel converted to gas in '94
albell@uvic.ca
http://members.shaw.ca/albell




>
>> The dash in my syncro is out to install BEHR front AC. This
>> leads me to two questions:
>>
>> 1) Are there any jobs that should be done as long as the dash
>> is apart?
>>
>> 2) Any thoughts on relocating the radio?
>>
>> Thanks,
>> Chris

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.