Date: Mon, 27 Jan 2003 08:18:44 -0600
Reply-To: Stan Wilder <wilden1@JUNO.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Stan Wilder <wilden1@JUNO.COM>
Subject: Re: Syncor chasis & Sunroof Vanagon shell
Content-Type: text/plain; charset=us-ascii
To take boat to the lake hook it to your 1986 Oldsmobile station wagon.
Do not exceed 80 miles per hour getting there.
Arrive at the lake, Wait one hour to get the boat launched.
Have a good time on the lake (no alcohol).
Wait one hour to get a spot on the ramp to get your boat out.
Pull boat out with 1986 Oldsmobile Station wagon.
Oldsmobile station wagons are available at your local "We'll Finance" car
lots for about $500.00 US.
Worked for 13 years for me.
Stan Wilder
On Mon, 27 Jan 2003 00:18:57 -0000 Herb Mooney
<hmooney@RESTOREANDMORE.COM> writes:
> Ok, thanks for the bad news about the unibody set up. So I'd be
> better to
> finds a syncro for the drivetrain or to cut or weld a sunroof into a
> syncro.
> I guess I don't really need one bad enough to cut my sunroof up. But
> the
> Synco sure would make it easier to pull my boat out of the water on
> the
> ramp. What to do, huh...
>
>
> Herb in PA
>
> ----- Original Message -----
> From: "Michael Snow" <mwsnow@cox.net>
> To: "Herb Mooney" <hmooney@RESTOREANDMORE.COM>
> Cc: <vanagon@GERRY.VANAGON.COM>
> Sent: Monday, January 27, 2003 5:06 AM
> Subject: Re: Syncor chasis & Sunroof Vanagon shell
>
>
> > Herb Mooney wrote:
> > > This may a completely dumb question, or it may be almost
> impossible so
> be
> > > nice to a Vanagon newbie...
> > >
> > > If I wanted to unbolt (if possible like a beetle) the shell of
> my
> sunroof
> > > Vanagon and put it on a Synco rolling frame (if I could find a
> good
> doner
> > > frame) what am i getting involved it. Seems like a better
> alternative in
> > > theory then converting the drivetrain, but I haven't really
> taken a good
> > > look underneath my Vanagon to see if it can be done.
> > >
> > > Anyone have any thoughts? (nice thoughts only please)
> > >
> > > Herb in PA
> > >
> >
> >
> > The VW factory did it by sending the complete body to Steyr-Puch
> and
> > letting them install the Syncro drivetrain. Unlike the Beetle,
> the
> > Vanagon is unibody construction. The sides and top do not detach
> from
> > the floor, so there is no such thing as a Syncro "rolling frame".
> >
> > Mike Snow
>
>
________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com
|