Date:         Mon, 27 Jan 2003 16:16:04 -0800
Reply-To:     Matt Ratto <mratto@UCSD.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Matt Ratto <mratto@UCSD.EDU>
Subject:      giving up conversion project
Content-Type: text/plain; charset="iso-8859-1"

Hey Guys, I'm about to give up this project, or at least find some mechanic
to figure out the problems I'm having. I've done just about everything I can
think of and I still can't get it running. Before I was having a problem
where I had to run it so rich to get it to idle, now after changing the
distributor cap I can't get it to run at all. I'm finding myself doing the
same things over and over again. I've touched about everything, tested
almost everything (except, obviously the thing that's not working), I'm
about out of time, and out of options.

So, if any of you know a mechanic in San Diego (a traveling one would even
be better) that you think would be willing to take a look, send an email. I
really hate to give up the DIY part, but ah well, I guess my inexperience
finally caught me in the end.

Matt
-------------------------------------
Matt Ratto
Ph.D. Candidate
University of California, San Diego
mratto@ucsd.edu
http://communication.ucsd.edu/mratto
--------------------------------------