The plug is in the diesel bellhousing at 2 o'clock. It's plastic and is threaded. The "mark" which may be for TDC, depending on the flywheel, is between the two raised square bosses. Check it with the distributor rotor and the mark on the dist. rim. Dana
> I have a inlne-4 in my syncro in the diesel configuration (51 degrees). > Where is the TDC mark on the flywheel and is there an access-hole in the > tranny somewhere that i can view it?? I've been led to believe i can see > it through a plug in my tranny, but don't recall such a thing. Is there a > plug in the block instead? hmmmm. > thanks > matthew |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.