Date:         Tue, 11 Feb 2003 00:00:14 -0500
Reply-To:     Michael Vickey <vickrail@VELOCITY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Vickey <vickrail@VELOCITY.NET>
Subject:      Re: crazy o2 sensor prob

Sounds like a bad ground for terminal 13 on your computer.

Ground for this wire is on the left side engine block, under intakes.

If it is a Syncro, this ground is connected to one of the oil breather
bolts.

The wire for this ground comes out of the wire harness sheath that
contains the wires for the Hall Sender.

Search the recent Archives for discussion on this - it has come up off and
on.

Good luck

Michael
Personal VW web page:
http://www.velocity.net/~vickrail/moshevw.htm

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.