Date:         Thu, 13 Feb 2003 17:59:40 -0500
Reply-To:     kdlewis@JUNO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Lewis <kdlewis@JUNO.COM>
Subject:      Re: VDO Oil Pressure Extension Adaptor
Comments: cc: gull@cyberspace.org
Content-Type: text/plain; charset=us-ascii

You are probably right, as long as you never have to undo it. What
happens then? Like after a rebuild. At the best you have a cross-thread
situation, at the worst threads fall out (or in). I plan on keeping my
truck a long time. I have spent a lot of money and time doing things
correctly. To intentionally screw a tapered, standard pipe thread into a
straight metric hole goes against my grain.
        There is big sign in my garage to remind me; "There is never time
to do it right but there is always time to do it twice".

Good Luck and Drive Safely
Ken Lewis
86 Crewcab, 60 356 T-5
http://Neksiwel.20m.com/


On Wed, 12 Feb 2003 20:17:11 -0500 (EST) David Brodbeck
<gull@cyberspace.org> writes:
> On Wed, 12 Feb 2003, Ken Lewis wrote:
>
>
> I've heard, though, that they'll mate with each other and make a
> leak-free
> joint if you use a little teflon tape.  These are tapered pipe
> threads so
> there's some room for fudging, I would think.
>
>              _ _
>   __ _ _   _| | |  | David M. Brodbeck (N8SRE)
> Ypsilanti, MI
>  / _` | | | | | |
> +-----------------------------------------------------
> | (_| | |_| | | | @ cyberspace.org
>  \__, |\__,_|_|_| "Everything is linear if plotted log-log with a
> fat
>  |___/             magic marker." -- Mar's Law
>
>
>

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com