do you have the brace that goes at about 45 degrees from the slave-cylinder 'bracket' down and forward to the tranny? There is one bolt that goes into the tranny and the other end goes to thebracket. I think it sandwiches in with the bolt that holds the slave cylinder to the bracket.
> I have lost almost all cluch functions. Looking at the slave > cylinder when in operation, the bracket moves upwards about 3-5mm. > It is the part of the bracket that sits around the clucth arm that > is "loose". |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.