As long as the flame is clean and blue, use it as it is. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of Gerald Masar Sent: Sunday, February 16, 2003 8:08 PM To: vanagon@GERRY.VANAGON.COM Subject: Westy stove adjustment The right side burner on my '90 Westy stove seems to be out of adjustment. Full flame comes before the icon on the knob and as I adjust it down to minimum flame (turning counter-clockwise), the flame goes out. In other words, I can't turn it down to the stop and have very low flame as on the other burner, which works perfectly. The burner caps are clean as are the tubes underneath and in the front. The knob fits properly and the shaft is tight. I can find no information on adjustment in the brief sheet that came with the camper. Any suggestions? Please? Jerry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.