Date:         Mon, 17 Feb 2003 11:04:41 -0500
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Westy stove adjustment
Comments: To: Gerald Masar <azsun99@EARTHLINK.NET>
In-Reply-To:  <000901c2d621$164cec40$7409b83f@computer>
Content-Type: text/plain; charset="US-ASCII"

As long as the flame is clean and blue, use it as it is.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of Gerald Masar
Sent: Sunday, February 16, 2003 8:08 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Westy stove adjustment

The right side burner on my '90 Westy stove seems to be out of
adjustment. Full flame
comes before the icon on the knob and as I adjust it down to minimum
flame (turning
counter-clockwise), the flame goes out. In other words, I can't turn it
down to the
stop and have very low flame as on the other burner, which works
perfectly. The burner
caps are clean as are the tubes underneath and in the front. The knob
fits properly
and the shaft is tight. I can find no information on adjustment in the
brief sheet
that came with the camper. Any suggestions? Please?
Jerry