Any pointers,instructional website locations, cautions, suggestions, downright warnings, etc, would be > appreciated. > Thanks,> John Rodgers> 88 Gl driver -------------------------- Clip --------------- I think this has been written up many times but here goes again. Remove the instrument cluster cover, remove enough fluid from the brake reservoir to get it down below the side feed out to the clutch. Trusty turkey baster works for me. Remove two screws from the cover on the bottom side of your steering column. Remove two 13mm bolts from clutch master right there behind the steering column. Remove the single steel line 11mm open wrench. Remove the braided rubber line from the clutch master (catch drips on newspaper). I think you can take it from there. Stan Wilder ________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.