On Thu, 20 Feb 2003, Joseph Fortino wrote: > try the 17mm socket tool with a 17mm open end wrench worked for me, be real careful with the threads backing out and reinstalling. * make sure the hex in clean also * And take out the fill plug first, so you know you can put new oil in before you let the old stuff out! :) _ _ __ _ _ _| | | | David M. Brodbeck (N8SRE) Ypsilanti, MI / _` | | | | | | +----------------------------------------------------- | (_| | |_| | | | @ cyberspace.org \__, |\__,_|_|_| "...we're not getting the creeps who knocked the |___/ buildings down. We're getting the creeps whose address we know." -- Maureen Dowd |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.