Date: Tue, 4 Mar 2003 22:48:41 -0800
Reply-To: Mark Dorm <mark_hb@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Mark Dorm <mark_hb@HOTMAIL.COM>
Subject: Re: How you will blow your motor using Bar's leaks
Content-Type: text/plain; format=flowed
I can't understand why anyone would want to use Bar's leak.
However, I do believe in Moroso Ceramic Engine Sealer... and this tale
points to the need for bleeding the thermostat housing before adding the
moroso... (and don't bleed it while moroso is the coolant system... cause
wherever there is metal, water, and air moroso will act to seal it up in the
presence of heat... {?}... which includes your bleeders, and any screw
threads... )
>From: Robert Keezer <warmerwagen@HOTMAIL.COM>
>
>I got a bunch of part's from a junkyard engine a few months ago for the
>burnt 2.1 WBX I'm restoring.
>
>Taking the thermostat housing apart today I made an interesting discovery
>why this engine overheated and blew .
>In the passage way beneath the thermostat was a big gray ball of "dough"
>like material. This must be Bar's leaks.
>
>The flange where it bolts up to the head was melted and sealed with
>silicone.
>
>I knew from this that the driver's side head got pretty hot, and now I know
>why. The ball of gray Bar's leak was big enough to block flow through the
>thermostat. So the engine overheated.
>
>I found that the same head gasket had been over-torqued. and was all split
>up inside. Both heads were new, so this was a poorly executed head gasket
>job that ended up leaking and then bar's leak was added (or something gray)
>to stop the leaking.
>All it did was clog up the system and kill the engine.
>
>So , a bad head job led to leaks which led to bar's leak and silicone.
>The leaking flange was the early warning that went unrecognized. Rather
>than
>try to figure out why the head would get hot enough to melt plastic, the
>owner/mechanic justr went"ho-hum" and lathered on the silcone.
>
>He had to have seen it was melting. Ad so his beloved or cursed Vanagon
>ended up in the junkyard for which I am grateful.
>
>So if you have leaking heads you haven't told anyone about, and you've put
>a
>bunch a Bar's leak in, at least remove the thermostat cover and look under
>the thermostat for a gray blob.
>
>Robert
>
>1982 Westfalia
>
>
>Robert
>
>_________________________________________________________________
>MSN 8 with e-mail virus protection service: 2 months FREE*
>http://join.msn.com/?page=features/virus
_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/virus
|