Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2003, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 4 Mar 2003 08:39:30 -0500
Reply-To:     Wolfvan88@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Lilley <Wolfvan88@AOL.COM>
Subject:      Re: Mark vs. the Distributor - Chapter 1(was "Driving dog" pin
Comments: To: belanger@FLUID.COM
Content-Type: text/plain; charset=iso-8859-1

The pin is tapered and comes out one way.

I used a small drift and pounded the pin out. My 88 Digifant distributor had the trigger wheel attached to the shaft and would NOT come off. It was not easy, but I got the pin removed.

If it does not come off one way try the other way.

I put it on a vise just opened enought to be able to drive the pin out between the jaws. The distributor needs to be on a FIRM solid mount to drive the piun out.

Robert


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.