Date:         Sat, 1 Mar 2003 23:41:40 -0800
Reply-To:     Mark Belanger <belanger@FLUID.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Belanger <belanger@FLUID.COM>
Organization: Fluid, Inc.
Subject:      "Driving dog" pin removal
Content-Type: text/plain; charset=us-ascii; format=flowed

Greetings all,

Is it possible to remove the pin from what Haynes refers to as the pin
for the bottom of the "driving dog" without use of a small tactical
nuke?  This is the pin that holds the off-center key at the bottom of
the distributor which connects to the shaft below.

If so, I'd love to hear before I heat up the flame thrower.


Thanks,
MB

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.