Date:         Sun, 9 Mar 2003 23:28:29 -0500
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Oil cooler upgrade for WBX 2.1L
Comments: To: Mark Dorm <mark_hb@HOTMAIL.COM>
In-Reply-To:  <F62lMpdLWwgbqRJZcwR00031246@hotmail.com>
Content-type: text/plain; charset=us-ascii

Lowering the water temp 10F will help sometimes, but when the oil temp
decides to north of 260, lowering the water temp won't help much. In
addition, the heat from the oil is still being absorbed by the water
cooling system lowering it's available capacity. In extremely warm
weather, the the low temp t-stat and fan will accomplish little more
than running the fan more. Unless your stuck in slow moving traffic the
fan is a waste and does nothing more than help wear out the alternator.
If you really want to control the oil temps and add cooling capacity, an
external cooler with T-stat is the best choice.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of Mark Dorm
Sent: Sunday, March 09, 2003 10:15 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Oil cooler upgrade for WBX 2.1L

If you have a cooler thermostat with a matched fan switch... then your
water
that does the cooling will be cooler...

>From: Dennis Haynes <dhaynes@OPTONLINE.NET>
>
>What is overheating? The coolant or the oil. This will do nothing to
>lower the water temp and the effect on oil temp will not be that great
>as you will still be using hot water to cool the oil. High loads and
>speeds will still drive the oil temp higher than the coolant temp.
>
>Dennis
>
>
>-----Original Message-----
>From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
>Of Wolfburger
>Sent: Monday, March 03, 2003 11:37 PM
>To: vanagon@GERRY.VANAGON.COM
>Subject: Oil cooler upgrade for WBX 2.1L
>
>Greetings Listees!
>
>I'm thinking about ways to keep the toaster-oven-on-wheels from
>overheating. Is the cooler from Dieselgeek, a good option? How much
work
>is this to install? Is this worth the money?
>
>http://www.dieselgeek.com/oilcooler.htm
>
>Any insight is appreciated.
>
>Josh
>'89 Wolfy
>Fall City, WA


_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail