Date:         Wed, 12 Mar 2003 07:18:55 -0800
Reply-To:     Zoran Mladen <zmaninco@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Zoran Mladen <zmaninco@YAHOO.COM>
Subject:      Re: Connectors for Fuel and Ignition wiring harness Digijet  83.5
              - 85
Comments: To: Mark Belanger <belanger@FLUID.COM>
In-Reply-To:  <3E6E8BC7.7080308@fluid.com>
Content-Type: text/plain; charset=us-ascii

Also try suppliers such as Wurth Fastener.  They used
to carry these connectors, haven't checked in quite a
while.

Z

--- Mark Belanger <belanger@FLUID.COM> wrote:
> Bergin, Richard wrote:
> > I have a spare harness in pretty good shape and
> would like to use it as a template
> > to create a new harness (since no longer available
> from the dealership).
> > Are all or most of connectors available "new" ?
>
> I doubt it, but I'd check the connectors to see if
> there's a
> manufacturers stamp on them.  A lot of connectors
> come from places like
> Digikey or Molex.  Alternately, you can use the
> Thomas Register to try
> and track down automobile specific
> connectors(assuming the vendor isn't
> in Germany).
>
>
> -MB
> --
>
_______________________________________________________________________
> Mark Belanger - belanger@fluid.com


__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com