Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2003, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 8 Mar 2003 18:14:28 -0500
Reply-To:     Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Maglott <emaglott@BUNCOMBE.MAIN.NC.US>
Subject:      Re: refrigerator problem
In-Reply-To:  <20030308.161727.-426893.1.georgejoann@juno.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

I have observed that in trying to get it lit that it tends to go too rich rather than too lean to light. (Maybe this only applies to my particular fridge???) It took me a year or more to come to this realization. I believe this is why people find blowing air in the drain tube helps on lighting. The thing that tipped me off was that upon removing the drain tube plug and pushing the button that turns the gas on, I could start to smell propane at the drain tube pretty quick. And quite strong too. The other thing that clued me in was that after it was too rich I would wait and periodically hit the ignitor. At some point I would get a big pop, and see a bit of orange flame shoot out the drain tube, and see it flash in the sight glass. In the early days of trying to light the thing I would hold the gas button a few seconds before even trying the ignitor. It would go too rich and not light. Now I start hitting the ignitor as soon as I press the gas button, and it works much better at lighting.

The other thing that I did while I had the fridge out recently was to seal up all air leaks in the combustion loop. To find them, I had a lovely assistant wrap her lips around the exhaust vent and blow. This after blocking off the air intake, drain tube and air pump openings. Then I went with soapy water and found a few leaks on the combustion chamber itself. Sealed them up with high temp silicon.

Edward

At 04:15 PM 3/8/2003, you wrote: >Michael Bertin asked: > ><< I can't get the refrigerator to work on propane in my '84 Westy....Can >anyone explain to me what I should be doing to fix the probem or >troubleshoot. Would I have to take the refrigerator out of it's place and >is it difficult to take it out? >> > > You do know that the easiest way to get a Westy fridge to light on >propane is to let it start cooling first using either the 110 volt or 12 >volt settings, right? Assuming you tried that and it still wouldn't >start, before you go through all the trouble of removing the box, (it >ain't difficult, but it's a pain) try this:


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.