Date: Wed, 19 Mar 2003 18:41:11 -0500
Reply-To: Anthony Hecht <lists@SLAPNOSE.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Anthony Hecht <lists@SLAPNOSE.COM>
Subject: Re: still not starting..
In-Reply-To: <BA9E6463.7159%aljordans@attbi.com>
Content-Type: text/plain; charset="US-ASCII"
Thanks for the replies..
Here's the update:
The spark plugs are sparking, very nicely I might add, since the addition of
a brand new coil.
The gap is .027".
The compression is 130psi in all cylinders.
Now this ditributor/timing thing intrigues me. It's quite likely that the
ditributor was bumped and/or rotated, since it's been installed in an
entirely new engine, I can't be sure it's exactly the same. How can I adjust
the timing before the engine has started for the first time? Is there an
easy way to trial-and-error this?
Oh, and the plug wires are in the right order, I checked the photo of the
old engine before it was removed for reference.
I have not yet pulled an injector to check for a good pattern, I was hoping
not to have to do this. I'm pretty sure gas is getting in there, though, I
can smell it. But I can't speak to the pattern. The injectors were working
fine when they were on the old engine though. If I do pull them, should I
check all four?
Thanks again everybody..
Anthony
'80 Camper "Badunkadunk"
http://travelinvan.com <http://travelinvan.com/>
-----Original Message-----
From: al jordans [mailto:aljordans@attbi.com]
Sent: Wednesday, March 19, 2003 6:16 PM
To: Anthony Hecht
Subject: Re: still not starting..
Hi,
I assume you mean spark plugs are sparking?....What kind of gap are you
running?
It's kind of a theorem that if you have spark and you have gas, it pretty
much
has to run, unless you heard expensive noises when it shut down.
Did you bump the distributor (is it tightened down?) and/or rotate it
(changing the timing) in your playing?...
if the spark doesn't hit a compressed gas charge, not too much happens.
Did you check the compression?
The popping could mean a plug firing into the exhaust cycle...
Good luck
alj
> From: Anthony Hecht <lists@SLAPNOSE.COM>
> Reply-To: Anthony Hecht <lists@SLAPNOSE.COM>
> Date: Wed, 19 Mar 2003 17:18:00 -0500
> To: vanagon@GERRY.VANAGON.COM
> Subject: still not starting..
>
> It's been a long couple of days..
>
> So, I have oil pressure, I have a new coil. The wires are sparking. The
> engine isn't starting.
>
> I've taken the plugs out, disconnected hoses from the intake air
distributor
> to let it dry out, disabled the cold start valve, everything I could think
> of, it just won't fire.
>
> Before the CSV was disconnected, it was sort of sputtering, but more like
> backfiring. To the point that it blew one of the intake pipe boots off the
> pipe. White smoke from the exhaust, and from the intake distributor when
it
> backfires, but nothing more.
>
> If any of you very knowledgeable people can suggest some more things to
try,
> I'm all ears (eyes). I'm starting to run out of ideas.
>
> Thanks,
> Anthony
> '80 Camper "Badunkadunk"
> http://travelinvan.com
|