In a message dated 3/26/03 4:24:18 PM, j_rodgers@CHARTER.NET writes: << The formula to calculate the FT/lbs is to multiply the length of the arm times the force applied. >> As long as the force is tangent to the swing of the lever; the force is a vector whose magnitude can only be specified with its direction. That is why a beam torque wrench has a floating handle. Having said that, if you are hanging a dead weight from a lever in order to apply a known torque, use a clevis between the weight and the lever, then stop when the lever is sorta horizontal. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.