You have to fight it loose by pushing up and wiggling it at the same time. Spray WD40 or similar into the crack along the top. There is a rubber strip in there between the body and the panel strip. If the area has been repainted over you may need to run a razor blade along the seam and cut the paint. Mark John Rodgers wrote: > > Can anyone tell me how to remove the sliding door track guard panel aft > of the sliding door? I removed the two screws but cannot budge the > panel. It is stuck tight. I would really hate to bend tha panel trying > to remove it, but I have to get under it to access some of the sliding > door hardware that is causeing a problem. > > Any input will be appreciated. > > Thanks, > > John Rodgers > 88 Gl Driver > Birmingham, AL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.