Hi all: I've now cleaned up (removed all the ragged cuts and excess material from the stamping process) and carefully measured out 5 sets of barrel shims; 3 sets from the Bus Depot and 2 acquired locally. All of the shims are remarkably out of spec to their nominal size with the closest measurements coming in at 4 thousands over and one set as much as 8 thousands over. Is that the norm these days? Anybody bought these directly from VWofA (I shudder to think of the price) and can comment on their quality? TIA. --------------------------------------------------------------- Tom Young '81 Vanagon Lafayette, CA 94549 '82 Westfalia --------------------------------------------------------------- |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.