Don't know since I've never used it myself. If you have trouble locating the product let me know and I'll get specifics for you. Richard
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Alistair Bell Sent: Thursday, March 27, 2003 7:48 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: Dash printed circuit on 26/3/03 10:56 pm, Richard Brassaw wrote: > Went by an electronics part supply last night picking up a capacitor for > the AFM fix. While there I asked about repairing a printed circuit. > They had some stuff that was specifically designed to do the job. It > was nickel suspended in liquid that is brushed on. Even if I used the > stuff I'd still put a coat of finger nail polish over it just for added > protection. > > Richard
That sounds interesting, do you know if it remains as flexible as the original foil? I guess that would depend a lot on how "thick you laid it on".
Alistair -- '82 Westy -> diesel converted to gas in '94 albell@uvic.ca http://members.shaw.ca/albell |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.