In a message dated 3/23/03 12:19:18 PM Pacific Standard Time, j_rodgers@CHARTER.NET writes: << Question. Will the engine be able to handle the relative change in the gear ratios brought on by the bigger drive wheels? >>
John, You can always go to a lower profile tire so you can preserve your present gear ratios. Putting smaller than stock diameter wheel in the front is a no-no for Syncros. For two wheel drive, you will find that your speedo will read high as the smaller needs to turn more to make up the distance. You will also find that the ride quality will stiffer as you will be transferring some of the weight forward due to the "rakish" stance. I assume you have stock springs. I achieved the same thing with aftermarket springs. Looks cool but does give a harsher than stock ride. benT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.