Date: Fri, 28 Mar 2003 06:40:15 -0500
Reply-To: Vanagon man <vgonman@MSN.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Vanagon man <vgonman@MSN.COM>
Subject: Re: replacing noisy lifter for 91 multivan
Content-Type: text/plain; charset="iso-8859-1"
WBX is not quite as easy as on a type 4 engine......you cannot pull the
pushrod tubes out thru the head on a WBX, so you will need to have 8 spring
laded pushrod tubes and seals if you go this route.
Also, want about priming the lifter before installing? No mention made of
that...........
Adam P
81 Westy "The Brick "
70 Single Cab "Whitey"
74 Beetle "Ol Yeller"
73 Transporter (STILL at paint shop)
1988 Vanagon Wolfsburg
1976 Transporter (New CA bus)
1974 412 "Goldmember"
Used Vanagon Parts for sale (mostly aircooled)
----- Original Message -----
From: "Stan Wilder" <wilden1@JUNO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, March 27, 2003 8:07 PM
Subject: Re: replacing noisy lifter for 91 multivan
> Here is how I do it.
> 1) Adjust the valve lifters / rocker to 1 turn down from just touching.
> This is to be sure everything is equal.
> 2) run the engine for about ten minutes, around the block works good.
> 3) Listen for noise from lifters.
> 4) Buy two new lifters and install them on #1, adjust them. Drive around
> the block several times.
> 5) Wouldn't it be nice if this fixed it, if it isn't the fix return the
> original lifters to #1 locations and put the new lifters in #2 and so on
> until you get it quiet.
>
> Stan Wilder
>
> On Thu, 27 Mar 2003 19:37:04 -0500 John Lunetta <blun1432@OPTONLINE.NET>
> writes:
> > It doesn't matter, It just makes more sense to work on one side at a
> > time.
> > You are correct the firing order is 1432. But if you turn the
> > engine
> > backwards after you adjust no.1 it will be 2,3,4. get it?
> > John Vanagon gl 2.1
> > ----- Original Message -----
> > From: "Jay L Snyder" <Jay.L.Snyder@usa.dupont.com>
> > To: "John Lunetta" <blun1432@optonline.net>
> > Sent: Thursday, March 27, 2003 9:46 AM
> > Subject: Re: replacing noisy lifter for 91 multivan
> >
> >
> > >
> > > Don't you need to follow the firing order which is not 1-2-3-4?
> > >
> > > Jay
> > >
> > >
> > >
> > >
> > > This communication is for use by the intended recipient and
> > contains
> > > information that may be privileged, confidential or copyrighted
> > under
> > > applicable law. If you are not the intended recipient, you are
> > hereby
> > > formally notified that any use, copying or distribution of this
> > e-mail,
> > > in whole or in part, is strictly prohibited. Please notify the
> > sender
> > > by return e-mail and delete this e-mail from your system. Unless
> > > explicitly and conspicuously designated as "E-Contract Intended",
> > > this e-mail does not constitute a contract offer, a contract
> > amendment,
> > > or an acceptance of a contract offer. This e-mail does not
> > constitute
> > > a consent to the use of sender's contact information for direct
> > marketing
> > > purposes or for transfers of data to third parties.
> > >
> > > Francais Deutsch Italiano Espanol Portugues Japanese Chinese
> > Korean
> > >
> > > http://www.DuPont.com/corp/email_disclaimer.html
> > >
> > >
> >
> >
>
> ________________________________________________________________
> Sign Up for Juno Platinum Internet Access Today
> Only $9.95 per month!
> Visit www.juno.com
>
|